HID® EDGE EVO® Solo ESHRP40-K

HID® EDGE EVO® Solo ESHRP40-K

HID® EDGE EVO® Solo ESHRP40-K Networked controller/Reader & Module

OVERVIEW

HID Global’s EDGE EVO® Solo ESHRP40-K Controller/Reader and Module is a cost-effective, stand-alone, IP-enabled access control solution that is designed for sites with one or two doors in an indoor single reader or indoor/outdoor two reader environment.. Distributing intelligence right to the door, the single-door solution provides the ability to power all devices around a door using Power over Ethernet (PoE), significantly reducing total door installation costs by eliminating the need to install a separate power supply. It also utilizes less expensive CAT5 wiring compared to traditional structured cable.The ESHRP40-K includes native interfaces to four inputs and two outputs. CAT-5 cable is routed directly to reader/controller located next to the door and an internal four-wire bus then connects the reader with a secure-side installed module (e.g. installed opposite reader on secure side wall or in ceiling). All door components are wired in a star-network like fashion directly to the module.

HID® EDGE EVO® Solo ESHRP40-K is ideal for securing a single monitored door indoors that requires HID Prox and/or iCLASS® card interoperabilty and uses traditional door components. The ESHRP40-K also meets the need for implementing a two reader door (in/out reading), where the reader/controller is mounted indoors and the remote Wiegand or Hi-O iCLASS reader is located outside (with the module installed in a secure location near the door).

SPECIFICATIONS
  • Model (and Part #): ESHR40-K (83125CKI000)
  • Mounting Holes: US Single-gang and EU / APAC 60 mm
  • Dimensions – EHR40: 3.3″ W x 4.8″ H x 1.2″ D (83.9 mm x 122.2 mm x 30.5 mm)
  • Dimensions – EDM-M: 3.3″ W x 5.0″ H x 1.5″ D (84.0 mm x 127.0 mm x 37.0 mm)
  • Weight – ESHR40: 6.3oz (180g)
  • Weight – EDWM-M: 4.9oz (140g)
  • Operating Temperature: 32° to 122° F (0° to 50° C)
  • Operating Humidity: 5% to 95% relative, non-condensing
  • Communication Ports: Ethernet (10/100), Hi-O CANbus
  • 13.56 MHz Card Compatibility: 13.56 MHz iCLASS HID Application, ISO14443A CSN
  • Warranty: Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details).
  • DC Input (MAX) @:
  1. PoE: 14.4W (300mA @ 48VDC)
  2. AUX +12VDC:18W (1500mA @ 12VDC)
  3. AUX +24VDC: 36W (1500mA @ 24VDC)
  • Supervised Inputs Power (MAX) : 0.025W (5mA sink, 5V nominal) 0 to +5VCD Ref
  • DC Input @:
  1. PoE: 8W
  2. AUX +12VDC:13.1W
  3. AUX +24VDC: 26.6W
  • Hi-O CANbus Output Voltage, DC Input = PoE: 24VDC
  • Hi-O CANbus Output Voltage, DC Input = AUX: AUX +VDC

 

Download
Datasheet SOLO ESHRP40-K Download

,

Contattaci per Informazioni Tecniche o Commerciali!