HID® EDGE EVO® Solo ESHR40-K

HID Global’s EDGE EVO® Solo ESHR40-K Controller/Reader and Module is a cost-effective, stand-alone, IP-enabled access control solution that is designed for sites with one or two doors in an indoor environment. Distributing intelligence right to the door, the single-door solution provides the ability to power all devices around a door using Power over Ethernet (PoE), significantly reducing total door installation costs by eliminating the need to install a separate power supply. It also utilizes less expensive CAT5 wiring compared to traditional structured cable.The ESHR40-K is a single door controller/reader and module with native interfaces to four inputs and two outputs. CAT-5 cable is routed directly to reader/controller located next to the door – an internal four-wire bus then connects the reader with a secure-side installed module (e.g. installed opposite reader on secure side wall or in ceiling). All door components are wired in a star-network like fashion directly to the module. The HID® EDGE EVO® Solo ESHR40-K is ideal for securing a single monitored door located indoors that uses traditional door components.

• Model (and Part #): ESHR40-K (83120CKI000)
• Mounting Holes: US Single-gang and EU / APAC 60 mm
• Dimensions – EHR40: 3.3″ W x 4.8″ H x 1.2″ D (83.9 mm x 122.2 mm x 30.5 mm)
• Dimensions – EDM-M: 3.3″ W x 5.0″ H x 1.5″ D (84.0 mm x 127.0 mm x 37.0 mm)
• Weight – ESHR40: 6.3oz (180g)
• Weight – EDM-M: 4.9oz (140g)
• Operating Temperature: 32° to 122° F (0° to 50° C)
• Operating Humidity: 5% to 95% relative, non-condensing
• Communication Ports: Ethernet (10/100), Hi-O CANbus
• 13.56 MHz Card Compatibility: 13.56 MHz iCLASS HID Application, ISO14443A CSN
• Warranty: Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details).
• DC Input (MAX) @:

1. PoE: 14.4W (300mA @ 48VDC)
2. AUX +12VDC:18W (1500mA @ 12VDC)
3. AUX +24VDC: 36W (1500mA @ 24VDC)

• Supervised Inputs Power (MAX) : 0.025W (5mA sink, 5V nominal) 0 to +5VCD Ref
• DC Input @:

1. PoE: 8W
2. AUX +12VDC:13.1W
3. AUX +24VDC: 26.6W

• Hi-O CANbus Output Voltage, DC Input = PoE: 24VDC
• Hi-O CANbus Output Voltage, DC Input = AUX: AUX +VDC